Category Archives: Anatomy

Grey’s Anatomy season 19: When could we hear about season 20? – CarterMatt

Greys Anatomyseason 19 is coming to ABC a little this year but for the sake of this article, were looking ahead far ahead. To be specific, were talking about season 20 and when some of the first news could officially come out about that.

Just like youre having to be patient to get news on season 19 production, youre also going to need patience to get news on season 20 a LOT of patience, in fact. The earliest that we can see discussions even happening on the future is this fall, and thats because the top priority is getting the new season off the ground. The important thing to remember along the way here is that the writers are typically several scripts ahead of where the cast and crew are in filming. That means that by the end of the fall, it would be useful for them to have a rough idea.

We would assume that by the first couple of months in the new year, folks behind the scenes will start to understand more of which way things are leaning. For us as viewers, ABC could easily drag this out further. Dont be shocked if there is a situation where we dont find out anything definite until the spring. We do think they will tell us prior to the final episodes if this is the final season or not, largely because that is the thing that makes the most overall sense.

Do we think the show is going to be winding down at some point sooner rather than later? Most likely, yes however, season 20 is such a nice number to end things on, and we can think of no other appropriate way to tie everything together. (Of course, if ABC gives the show a season 20 we wouldnt be mad about that, either.)

Related Be sure to get some more news when it comes to Greys Anatomy right now

Share right now in the comments! Once you do just that, come back there are other updates on the way and of course, we dont want you missing any of them. (Photo: ABC.)

More here:
Grey's Anatomy season 19: When could we hear about season 20? - CarterMatt

Anatomy of a modern data stack and 4 key benefits it creates – Construction Dive

Construction firms that know how to harness their data are increasingly at a competitive advantage in today's complex world and the latest research emphasizes just how much of an advantage.

In fact, faulty construction data may have caused $1.8 trillion in losses worldwide and been responsible for 14% of avoidable rework, or $88 billion, according to Autodesk and FMI.

That same report found that 75% of contractors said there's an increased need for rapid decision-making in the field exactly where good data is crucial. But only 55% of contractors had implemented a formal data strategy for project data, and only 12% always incorporated project data into their decision-making.

The solution to these problems is the modern data stack. But just what is it, and why should contractors care?

"The modern data stack is a scalable, low barrier to entry, group of technologies that firms can adopt to drive value from their data," said Matt Monihan, CEO of ResponseVault, a data-engineering firm specializing in the construction industry. "That's important because, with the modern data stack, you can surface data without every single app having a direct integration with another one."

Monihan said the goal is true data integration, which many construction firms mistakenly believe they have achieved because of questionable claims from software-makers about integration. But, while integrations may technically be available, they don't always provide true data insights firms need to make smarter decisions and predict outcomes. "The granularity of the integration is key and varies between vendors," Monihan said.

In this article, we'll explore the anatomy of the modern data stack and answer questions about four key benefits it creates.

Point solutions are where your data originates. Whether it's coming from the field, the office or the owner, your data is being collected in a structured form, like Procore change events, or from free-form data sources like Spreadsheets. The data generated from these point solutions run your business, and the solutions are made to collect the data properly.

Once you've collected your jobsite data in point solutions, the next step is to securely and reliably export that data into a storage container, often referred to as a data warehouse, data lake or even a data lakehouse. As technology evolves, the differences between those industry terms have blurred, but what's important is that a piece of middleware is required to move the data between the point solution and its staging area in the warehouse.

The data we're extracting from our point solutions needs to live somewhere, and that is where our storage method is chosen. The cost of entry to this component has reduced, both with the introduction of Amazon Redshift as a lower-cost analytical database and with the rise of accessible, open-source databases introducing features that enable many use cases that weren't previously possible in years past. So, once you've selected and set up your storage and data is flowing, next is doing something with the data: Analysis.

Now is the time to model the data across your data sources, identify fields that combine disparate data sets, and clean the data into unified models. This step requires a dedicated data analyst who can communicate with people in the field who are generating the source data and reconcile any discrepancies with stakeholders looking for reports and dashboards. Your analyst will need to work with many Business Intelligence (BI) tools available in the market today. No one BI tool covers everything you may need. What's important is that you pick one and stick with it.

This step is where you'll need a layer that continually tests and lets you know that the entire stack is functioning correctly. It's where you'll receive alerts about outages, expired authentication tokens, broken models and more.

The goal is to have a robust and comprehensive set of tools to not only proactively monitor the stack's health but also provide a straightforward process for investigating problems that may arise.

Now that you understand the anatomy of a modern tech stack, it's essential to understand its benefits.

1. How does the stack reduce manual data entry and inconsistent data? Manual data entry and conflicting data are collectively costing contractors billions. These twin problems often cause multiple apps and tech tools companies use to gather data. Although processes are digitized, the apps and tools don't integrate; thus, data becomes siloed in the various solutions. To get a report, someone must manually go into the different tools or apps and export the data. 42% of companies use four to six apps for their construction jobs, and 27% report that none of those apps integrate. As a result, data is transferred manually nearly 50% of the time, according to JBKnowledge. Because it integrates data across apps and systems, modern data stacks provide digital access across the enterprise and a single source of truth.

2. How do disparate data sources get connected? Although many construction IT professionals know about major database suppliers, such as Oracle, they may not be aware of the many better off-the-shelf data tools available to integrate data. These connectors save considerable IT time and cost and ensure the data is secure and reliable with a trusted single source of truth. In that scenario, BIM changes can be made in a 3D render using real-time job site data. Then, if an architect or owner wants to make a change, a cost analysis can be done in real-time based on how the project is going.

3. Where does the data go? The modern data stack relies on a data warehouse that's typically cloud-based. This cloud data warehouse can store and quickly access large quantities of data without breaking the bank. It ensures that all company data flows appropriately to this data warehouse so that firms can gain actionable insight into real-time data. That's key because poor project data and miscommunication cause 52% of rework. This means $31.3 billion in rework was caused by bad project data and miscommunication in the U.S. alone in 2018, according to FMI/Autodesk report.

4. How do we ensure that the various integrations are working properly and that data is correct? Unlike black-boxed integrations, the modern data stack provides a clear picture of data, so it's easy to see, manage and manipulate. For example, the stack includes orchestration tooling, data management frameworks and data-quality monitoring tooling for high observability other tools, such as data governance, surface organizational problems.

The result is the ability to create meaningful data dashboards that get insights that matter, such as subs' quality of work, safety scores and schedules. "With the modern data stack, you have a window into exactly what's happening," Monihan said. "It's not a black box. It's a transparent system for diagnosing, understanding and customizing how integration works."

See the article here:
Anatomy of a modern data stack and 4 key benefits it creates - Construction Dive

Anatomy of an Origin miracle: The manoeuvres behind Hunts magic moment – Sydney Morning Herald

Cherry-Evans finished with 642 kicking metres from 19 punts, on occasion even launching a long-range effort on the second tackle to turn the Blues back three around and nullify their all-important running game.

Queensland didnt mind if NSW had ball in hand as long as it was at their own end, with panicked mistakes from Jarome Luai, Stephen Crichton and Siosifa Talakai giving the Maroons the best of both worlds.

So when the Blues did finally work their way back up-field while trailing 16-12 the added defensive efforts took their toll, Queensland duly having their measure as the stakes increased by the second.

Heres how those frantic final moments and the catalyst of a miracle Origin play panned out.

74.03: After NSW finally start a set somewhere other than their own goal line, Damien Cook and James Tedesco are sniping around the ruck to have Queensland back-pedalling.

Loading

Clearys last-tackle bomb is missed by all as it comes down 12 metres from the try line, Jake Trbojevic of all people following up with a grubber. Tom Dearden covers it with no NSW chasers in pursuit.

76.04: After a grinding Queensland set the Blues are again in decent field position and load up with a right-side shift.

Theres time, space and an overlap out wide, but Isaah Yeo plays short to prop Jacob Saifiti and Dearden is able to bring him down. Clearys bomb back across field is taken by Gagai with the chasers five metres away from being able to challenge him.

77.01: With the Maroons again battling for yardage, Cherry-Evans kicks long and low for the touchline. Daniel Tupou cuts it off but is belted off his feet and into a slow play-the-ball by Tino Faasuamaleaui.

77.45: The Penrith connection swings into gear to create another overlap down the right through Cleary and Yeo. But a critical read from Corey Oates sees the veteran winger flying in on Stephen Crichton who is turned back inside toward Queenslands cover defence.

78.02: The miracle moment. Cleary takes the ball 32 metres out on the last with 10 metres between him and the defence.

NSW has five players lined up outside on the left to Queenslands four defenders because Gagai is already sat back deep in anticipation of another bomb.

Cleary goes to the line as Hunt pushes across to pressure him. Luai is on Clearys outside, Tedesco on his right, both ready to pursue the chip kick that comes once Cleary steps back sharply inside for the all-or-nothing play.

Loading

Hunt clutches the ball as it comes off Clearys right boot. Hes going for the charge-down but critically, never takes his eyes off the Steeden.

When Cleary delivers a deft rather than hefty touch, Hunt is airborne but latches on with both hands.

He lands, pivots, and takes off with only Yeo anywhere near him. Just 75 metres 80 he was already correcting observers in the sheds afterwards between him and a slice of Origin history.

See the rest here:
Anatomy of an Origin miracle: The manoeuvres behind Hunts magic moment - Sydney Morning Herald

Grey’s Anatomy star Kevin McKidd to continue filming The Elect in Glasgow tomorrow – here’s where – Glasgow Times

A Glasgow pub will be taken over by camera crews as filming continues for a new ITV drama starring Greys Anatomy heartthrob Kevin McKidd.

The Elect, a four-part Western adaptation of Japanese crime novel Six/Four, has been filming in and around the city.

As well as in the St Vincent Street area back in May, Trainspotting star McKidd was also spotted filming in the citys Drury Laneon Monday evening.

READ MORE:Grey's Anatomy star Kevin McKidd spotted by excited fan in Glasgow city centre

Now, on short notice, the crew will be shooting at The State Bar on Holland Street, which is mere seconds away from several popular Sauchiehall Street destinations.

Nearby residents received a letter through their door on Tuesday apologising for any inconvenience caused with interior filming expected to take place on Wednesday at some point between 8am and 4pm.

English actor Richard Coyle, who appeared in the Netflix series Chilling Adventures of Sabrina, is also starring in the drama alongside Saskia Ashdown and Brian McCardie.

Link:
Grey's Anatomy star Kevin McKidd to continue filming The Elect in Glasgow tomorrow - here's where - Glasgow Times

Anatomy of Unatu standoff with government | Monitor – Monitor

When the Uganda National Teachers Union (Unatu) and other public service unions signed Collective Bargaining Agreement (CBA) with the government on June 22, 2018, the public servants under the umbrella body thought the worst was behind them.

The CBA highlighted plans for salary enhancement across all categories of civil servants for Financial Years 2018/2019 and 2019/2020.

It, however, didnt take long to run into trouble.

In 2019, Unatu leadership mobilised teachers across the country to withdraw labour over delayed salary enhancement.

Consequently, President Museveni summoned teachers representatives and persuaded them to suspend the strike.

The salary enhancement discussions were put on the back-burner when schools shut their doors to two Covid-19 variants across nearly two years. The schools finally re-opened this January when pandemic curbs were relaxed.

On May 23, Unatus standing committee sat and unanimously ratified the resolution resolved to down their tools on June 15, if there was no satisfactory feedback on the issues pertaining to teachers salary increment across the board for Financial Year 2022/2023.

Mr Filbert Baguma, Unatus secretary general, added thus: Every financial year, teachers have to remind government about the commitments earlier made. Do teachers really matter to this nation? Are the commitments made by government mere boardroom gimmicks meant to silence teachers and foil any plans for industrial action?

Mr Baguma also revealed that due to alleged constant disappointments, anxiety was mounting among teachers.

Only satisfactory feedback from the government on their demands, he added, would stop the intended industrial action in its tracks.

In its absence, as promised, nearly 120,000 Arts teachers in government-aided primary and secondary schools downed their tools on June 15.

It would straddle more than a fortnight before the Arts teachers grudgingly accepted this past week to take up the chalk.

The call for industrial action came after Science teachers under their unionthe Uganda Profession Teachers Union (UPSTU)suspended their strike indefinitely.

The strike had been declared at the start of the second term. The Science teachers relented after the government assured them that the Budget for the 2022/2023 financial year catered to their salary enhancement.

On May 23, Unatu issued a notification to government expressing intention to resume their industrial action if government insisted on implementing discriminatory salary enhancements instead of honouring commitments made in the 2018 CBA.

Mr Baguma said during the signing of the CBA, it was also agreed that negotiations for 2020/2021 and 2022/2023 aimed at removing disparities in scales would proceed as agreed.

He further noted that while some categories of civil servants in the CBAparticularly those in phase onereceived their increment in full, teachers, who were supposed to benefit from phase two, received only 25 percent of the expected increment.

The Unatu secretary general, however, hastened to add that the union leadership was still open for further negotiations.

The option of a strike was not taken off the table, although, especially if their issues were not addressed.

A week into the Arts teachers strike, Ms Ketty Lamarothe Permanent Secretary in the Ministry of Education and Sportsrevealed that Unatus concerns were being discussed, internally.

Teachers should desist from anything that disrupts teaching and learning. Schools were grossly affected by the Covid-19 lockdown, and we are now trying to accelerate learning to recover the lost time, she noted, adding, [The Arts teachers] salaries will be enhanced, but in a phased manner because government does not have enough money to pay everyone at the same time.

Ms Catherine Bitarakwate, the Public Service ministry Permanent Secretary, also reiterated Ms Lamaros appeal.

Unatu though, was unwavering in its demand that the government pay Shs4.8m to graduate secondary school Science teachers and Shs4.5m for their Arts counterparts, among other categories. It wasnt long before the First Lady Janet Museveniwho also doubles as Education and Sports ministerinvited Unatus top brass for a meeting originally scheduled for June 17 but pushed to June 18 at State House, Entebbe.

The meeting, which was held behind closed doors, was addressed by President Museveni. Mr Usher Wilson Owere, the chairman general of National Organisation of Trade Union (Notu), described the meeting as stormy. Mr Museveni is reported to have advised the Arts teachers to return to work, promising that their enhancement would be done in a phased manner.

The Unatu top brass, which is said to have taken offence with the Presidents tone, defied his directive to return to class.

Not even a June 22 letter from Ms Bitarakwate that described the current industrial action by the members of Unatu as illegal swayed the teachers. The letterwhich in no uncertain terms said the striking teachers had decided to close the schools and that no teacher has the legal right or justification to close a public school without the concurrence of the governmentwas roundly criticised by the public.

Keen to mend fences, Ms Bitarakwate and Vice President Jessica Alupo wrote to Unatu on June 27 seeking an audience.

The Unatu top brass met with Ms Alupo on June 28, but the discussions helddescribed as cordial by Mr Bagumayielded no results.

On June 30, Unatu received two letters from the government directing teachers to return to class as negotiations continue.

The letters from Public Service Minister Wilson Muruli Mukasa and Ms Bitarakwate repeated explanations that scientists were cleared for salary enhancements because they are needed in crucial areas of the economy such as agriculture, industry, and ICT.

The letters precipitated a July 3 meeting involving members of Unatus national executive council.

While Unatu resolved to continue with the strike, there was a change in tune when the teachers met President Museveni on July 3. The teachers resolved to return to class effective July 6, with Mr Museveni later tweeting please dont divert us from our journey of attracting and retaining scientists by paying them comparatively and competitively. Dont interfere with governments strategy.

Soon, Mr Baguma found himself on the defensive for the first time after a disbelieving public questioned the sudden change of heart.

There is a rumour flying over social media that the leaders have been bribed. The leaders have a responsibility to take leadership if you dont take over your membership, then you can take them to a wrong direction, he said.

A section of Art teachers, who have since resumed teaching, said they are working with an extremely low morale.

Speaking on the floor of Parliament this past week, Opposition Chief Whip John Baptist Nambeshe (Manjiya County) said the selective enhancement of salaries has opened a Pandoras box.

Read the original post:
Anatomy of Unatu standoff with government | Monitor - Monitor

A ‘Grey’s Anatomy’ Writer Has Allegedly Swindled Shonda Rhimes in the Style of Shondaland’s ‘Inventing Anna’ – Showbiz Cheat Sheet

Shonda Rhimes is no stranger to tales that contain fact stranger than fiction. One of the writer and producers most recent projects, Inventing Anna, followed the story of a pathological liar. Now, it seems like one of Rhimes own Greys Anatomy writers is guilty of the same thing. So, who is Elisabeth Finch?

Finch started writing for Greys Anatomy after a since-deleted personal essay of hers published by Elle. In the piece, she discussed living and working with chondrosarcoma, a rare and usually fatal form of bone cancer. In her essay, Finch talked about how she continued working against the orders of her doctor.

When I defied Dr. Cryptics orders to take an indefinite leave of absence from work he thought chemo deserved my sole attention he doubted my commitment to getting well, she wrote in her article, according to Vanity Fair. At the time, Finch was working on The Vampire Diaries.

I watched the producers cuts under a fog of Demerol, punched up dialogue about vampire-werewolf hybrids with a shunt in my spine, Finch continued. Yes, I was down 17 pounds, bald, vomiting relentlessly, but I was still living alone. Still stubborn as hell.

The Elle essay caught the eye of a development executive at Shondaland, Rhimes production company. Finch ended up getting hired to work on Greys Anatomy. Since joining the show in 2014, Finch was credited as a producer on 172 episodes, and a writer for 13.

Most notably, Finch was credited as a writer on a 2018 episode of the medical drama, called Anybody Have a Map? In the episode, a patient undergoes an operation to treat her aggressive chondrosarcoma.

The people who worked at Shondaland were extremely supportive of Finch. They granted her time off for her chemotherapy and clinical trials. They also found her story inspirational; Finch was the only person who survived in one of her clinical trials yet she still came to work as often as she could.

After years of working at Shondaland, everyone thought they knew Finchs story. That all changed in 2022 when Rhimes received a mysterious email. The message was from Jennifer Beyer, Finchs estranged wife.

Beyer was writing to tell Rhimes that Finch was lying. Even though no one wanted to believe it, as they looked into Finchs story, things started to fall apart.

Finch first claimed she had been diagnosed with cancer while she was working on The Vampire Diaries. According to Vanity Fair, she would visit her family in New Jersey, bald from alleged chemo treatments and sporting a bandage where the chemo port would be.

However, Beyer claimed Finch still had her eyebrows and eyelashes. Notably, chemo patients typically lose these features while being treated. Also, she didnt have a scar where the port would have been.

According to Beyer, when she became suspicious and confronted Finch, the writer admitted, She had at one time had cancer, but that she got chemo, and recovered.

Her estranged wife also claimed that Finch lied about her brother committing suicide (hes alive), a friend dying in the mass shooting at the Tree of Life synagogue, and receiving a kidney from True Blood star Anna Paquin (the actress has denied this claim).

Since her story has been called into question, Finch has gone on a personal leave of absence from Greys Anatomy. Theres no word yet on when, or if, shell come back, or what kind of consequences she might face.

In a statement about her leave, Finch said, according to Deadline, I will always remain one of Greys Anatomys biggest fans. I loved the show from day one and had the honor to write for it since season 11. The proudest moment of my career was watching survivors of rape receive the episode Silent All These Years.

Greys Anatomy is one big-hearted, brilliant family, she continued. As hard as it is to take some time away right now, I know it is more important that I focus on my own family and my health. Im immensely grateful to Disney, ABC, and Shondaland for allowing me to do so and for supporting me through this very difficult time.

Finchs story of sickness, death, and organ donation has not been confirmed or denied. But fans cant help but point out the crazy similarity between her story and Rhimes own Inventing Anna series.

RELATED: Greys Anatomy: Sandra Oh Says Fame Literally Made Her Sick

Visit link:
A 'Grey's Anatomy' Writer Has Allegedly Swindled Shonda Rhimes in the Style of Shondaland's 'Inventing Anna' - Showbiz Cheat Sheet

Mobile X-ray Leaps into the Future with New Innovations from Konica Minolta Healthcare – Health Imaging

WAYNE, N.J., July 08, 2022 (GLOBE NEWSWIRE) -- Konica Minolta Healthcare Americas, Inc. announced today that the companys revolutionary Dynamic Digital Radiography (DDR) technology, enabling the visualization of anatomyin motion, will be available on the mKDR Xpress Mobile X-ray System.1The mobile system will also be compatible with the newest technology in wireless flat panel X-ray detectors, the AeroDRGlassless High Definition Detector. Both solutions enable clinicians to realize greater potential with X-ray, the most widely available diagnostic imaging modality and often the first imaging test a patient receives. These new advancements in X-ray technology are being introduced at the Association for Medical Imaging Management (AHRA) 2022 Annual Meeting in Phoenix at Konica Minoltas booth.

DDR is the next evolution in X-ray, enhancing diagnosis and management of pulmonary diseases and orthopedic conditions. DDR enables clinicians to visualize the dynamic interaction of anatomical structures, such as tissue and bone, with physiological changes over time. DDR is not fluoroscopy; it is a series of individual digital images acquired at high speed and low dose. In the same study, clinicians can acquire static and dynamic images. The resulting cine loop delivers up to 40 seconds of anatomy in motion in a diagnostic-quality view with a simple acquisition performed on a conventional DR system. DDR has been adopted by academic and community hospitals, orthopedic and spine clinics, and pulmonary centers across the US.

Pairing DDR with the high-performance mKDR Xpress enables clinicians to elevate patient care with mobile X-ray at the point of care in a hospital, says Guillermo Sander, PhD, Marketing Director for Digital Radiography, Konica Minolta Healthcare. Whether it is used to visualize anatomy in motion or observe physiological cycles, DDR adds significant clinical value with an exam that is fast and versatile at a low radiation dose. It is the only technology of its kind available today and in portable imaging, X-ray in motion is only possible on the mKDR Xpress.

The mKDR Xpress delivers exceptional imaging performance in a small footprint at the bedside or in the ER, OR, CCU or ICU. With a slim design and collapsible column to facilitate its use in tight spaces, the mKDR Xpress can be more easily moved wherever its needed. On-board charging for two detectors and front and back storage for detectors and accessories help technologists meet the most demanding mobile X-ray imaging needs. An industry-unique, tube-mounted graphical user interface and image preview function help ensure clear images are visible quickly, improving efficiency when time matters.

Lightweight and durable with enhanced sensitivity and resolution, the AeroDR Glassless Flat Panel Detector is the ideal wireless panel for mobile X-ray, as well as other applications. A glassless substrate replaces the glass-based substrate in the design for a detector that weighs 27% less than prior generation AeroDR Flat Panel Detectors only 4.2 lbs. with the built-in power cell. AeroDR Glassless Flat Panel Detectors deliver the same robust imaging and reliability as other models of AeroDR Flat Panel Detectors with an excellent drop impact resistance, an antibacterial carbon enclosure and eight hours of use after a 30-minute charge.

With a high detective quantum efficiency (DQE) and the worlds smallest pixel size of 100m, the AeroDR Glassless Flat Panel Detector delivers the resolution and image sharpness clinicians need to confidently evaluate the patients anatomy, even the finest and smallest structures. Intelligent Grid for grid-less imaging and tube and gauze image enhancement with REALISM make it ideal for use in surgical imaging applications.

Konica Minolta is imagining more possibilities with DR and mobile X-ray to help clinicians meet their most demanding imaging needs, providing solutions that redefine what radiography can do, adds Sander. We envision a world where advanced X-ray capabilities provide the immediacy of information that clinicians need, at a lower cost than other imaging systems, so they can make better decisions, sooner.

1Dynamic Digital Radiography on the mKDR Xpress Mobile X-ray System is pending US FDA 510(k) clearance.

About Konica Minolta Healthcare Americas, Inc.Konica Minolta Healthcare is a world-class provider and market leader in medical diagnostic imaging and healthcare information technology. With over 75 years of endless innovation, Konica Minolta is globally recognized as a leader providing cutting-edge technologies and comprehensive support aimed at providing real solutions to meet customers' needs and helping make better decisions, sooner. Konica Minolta Healthcare Americas, Inc., headquartered in Wayne, NJ, is a unit of Konica Minolta, Inc. (TSE:4902). For more information on Konica Minolta Healthcare Americas, Inc., please visithttps://healthcare.konicaminolta.us

Contact:Mary Beth MassatMassat Media224.578.2388https://healthcare.konicaminolta.us

A photo accompanying this announcement is available athttps://www.globenewswire.com/NewsRoom/AttachmentNg/5da9585c-0b53-4008-b2b6-86d60725bf8b

See the original post:
Mobile X-ray Leaps into the Future with New Innovations from Konica Minolta Healthcare - Health Imaging

Better orthodontic impressions with the putty + wash method – Dental Economics

I have found myself needing to consistently capture an accurate full-arch impression without voids. The easy answer, nowadays, is to use a digital scanner and capture the impression digitally. But many of our colleagues do not have the time and/or the money to invest in such equipment.

Additionally, certain orthodontic products offered on the market require digital impressions from a specific brand of digital scanner. That scanner, and many other scanners, typically would not yield an ROI signficant enough to warrant the initial, and ongoing, investment for many practitioners.

Instead, most of us use some sort of combination of heavy- and light-body vinyl polysiloxane (VPS) to capture impressions. The heavy and light bodies are dispensed out of a cartridge and then placed in one step into the patients mouth. Most of the time this works out well for capturing one, two, or three-plus indirect restorations.

Transforming patients and practices through a seamless digital workflow

Implant impressions: Tips and tricks for better results

But what about when an accurate full-arch model is taken? It is incredibly difficult to capture every detail of an arch in one shot using a one-step VPS impression. Theres a high chance that some portion of a tooth or vestibule will be missed. Certainly, custom trays can help, but those require an extra impression, an extra expense for the practice, and extra time for practitioner and patient. This is hardly ideal in todays private practice climate and expectations of our patients.

My everyday clinical technique to address this is the putty + wash method. I had heard about this method many times previously, but over time I have been able to perfect and utilize it in private practice with repeatable and precise results.

I mostly use the putty + wash method for full-arch impressions required for clear aligner orthodontia. However, its also useful for fabricating flippers, pre-wax-up models, and stents for indirect temporization once a wax-up is back from the lab. Some practitioners have used this as the final impression method for indirect restorations, but I personally have not attempted that technique.

I have been lucky enough to try various companies VPS materials and compared them using the putty + wash method. Along the way, one of my favorites has become Vocos V-Posil line of materials. Not only is this material top-of-the-line, but it has also been one of the most consistent products I have used.

V-Posil does all that it is advertised to do and more: Excellent tear strength and elasticitycheck. Exceptional dimensional stability post-setcheck. Contact angle similar to that of polyether for better hydrophilicity and displacement of fluidscheck. Fast-set time frame for patient comfort and clinical efficiencycheck.

It even has a secondary setting reaction using the oral cavitys and bodys heat to snap-set instead of having to wait for the catalyst-base reaction to finish. What does that mean clinically? A long pre-insertion working time and a faster post-insertion set time.

I encourage everyone to try Vocos V-Posil VPS material. I have found it to be one of the best VPS materials on the market. And for those of you who might not have heard of or dont know how the putty + wash method works, look below for a quick guide.

Setup: The initial setup includes: (1)V-Posil Putty Base & Catalyst, (2) V-Posil X-Light/Light VPS 50 mL cartridge and dispensing gun, (3) appropriate impression trays, (4) alcohol wipes, and (5) straight handpiece carbide burs (figure 1).

Initial putty impressions: In figure 2, you can see the initial V-Posil putty impression for both maxillary and mandibular arches. Note that the V-Posil putty has acted as a pseudo-custom tray due to the viscosity of the material. It also allows you to border-mold for further adaptation.

Anatomy removal: I have found that the most predictable way to achieve a rock-solid result is to trim away any undercuts, embrasure spaces, and occlusal anatomy using straight handpiece carbide burs (figure 3). The idea is to leave just enough occlusal stops to have a dimensionally stable seating during the second step of the putty + wash method. This is especially important in the mandible, where there isnt a palate. Note that one side is trimmed of embrasures, undercuts, and pertinent occlusal anatomy (figure 3).

Alcohol clean: In Figure 4, you can see both arches washed and dried with any major debris removed. The most critical step prior to the wash will be using an alcohol wipe inside the entirety of the impression. Any leftover blood or saliva can affect the adherences of the VPS wash to the putty and cause the practitioner to have to retake the wash impression.

The wash: I have found that dispensing the light-viscosity VPS wash to the height of the gingival margin will yield the best final result without the excess causing distress to the patient. In Figure 5, the V-Posil putty did its job beautifully, and you will notice I did not have to overadd the light-viscosity wash to make up for voids in the vestibule.

The final result: The putty + wash method gives the results we as practitioners need for consistent results. Using a material like Vocos V-Posil makes it even easier. Remember to use steady and heavy force when placing the wash into the patients mouth.

Note: Voco is a financial supporter of DE. All products mentioned in this article are used in the authors normal course of practice.

Editor's note: This article appeared in the July 2022 print edition of Dental Economics magazine. Dentists in North America are eligible for a complimentary print subscription. Sign up here.

View original post here:
Better orthodontic impressions with the putty + wash method - Dental Economics

Anatomy of a Coin: How to Identify Coins On Sight – Gainesville News

You have probably heard of the "heads" and "tails" sides of a coin. But there is so much more to take note of on any legal tender coin!

Let's break down each element of a coin's design with the handy infographic below.

If you would like to print out the infographic above for educational uses, please visit the Gainesville Coins infographics page.

The heads side of the coin is technically called the obverse. This simply means it is the front of the coin.

Fittingly, the obverse is typically where you will find an actual head or face. This is usually the portrait of a national leader or a symbolic representation of the country.

Sometimes, the obverse will not feature a person at all. In these cases, you can normally tell which side is supposed to be the front by the presence of the date.

Keep in mind that there is no concrete rule about which side must be considered the obverse. It is a matter of convention.

The tails side or back side of the coin is referred to as the reverse. It usually features the name of the country that issued that coin.

Again, there is no uniform rule for which side of the coin is heads or tails. You might even find a person's face on the reverse of a coin on some occasions.

Any image or writing on a coin can be called a device. It's simply another way of describing a feature of a coin's design.

Certain devices are required by law to appear on all United States legal tender coins:

The edge of the coin may have its own design.

The simplest edge design is a plain edge. It is smooth and featureless.

Probably the most common edge design is a reeded edge. This is also called a serrated edge or milled edge. Reeded edges look like a series of vertical lines along the edge of the coin. The reeding was also used to make it obvious if small amounts of metal had been filed away from the coin.

A view of the edge of a stack of quarters.

A lettered edge features inscriptions along the edge of the design.

Similarly, a decorative edge will show other symbols or decorations, such as stars.

There are two different ways that an image can be imparted onto a coin's surface: relief or incuse.

The much more common method is called relief. In sculpture, you may see this technique called bas-relief. With relief, an image is created by the features of the coin being raised above the field. You can check this yourself by closely examining a coin from its edge.

On the other hand, incuse designs are basically the opposite process. The design is created by engraving down into the surface of the coin, so the design features are all below the field. In the art world, incuse is often called intaglio.

The Indian Head design by artist Bela Lyon Pratt is among the only incuse coin designs you will ever find. It appeared on $5 and $2.50 gold coins in the U.S. from 1908 to 1929.

Some coinsespecially those made for collectorswill exhibit special finishes. These finishes help to highlight or enhance the beauty of the coin's design.

The standard finish for today's coins is Brilliant Uncirculated, abbreviated as "BU". This is the normal, shiny finish that many of us have come to expect on coins. Brilliant Uncirculated finishes impart an attractive cartwheel luster to the coin.

A proof finish is very popular for collectible coins. Proof coins feature specially polished fields that have a mirror-like appearance. The relief devices stand out against this mirrored background due to being "frosted."

2004-W Proof American Silver Eagle. When photographed, proof coins typically appear to have a black background.

In addition to proof and BU, mints around the world have developed other eye-appealing finishes for certain special edition coins. These include colorized coins, reverse proof coins, and other forms of enhanced uncirculated finishes (sometimes called burnished, sandblasted, or satin proofs).

There is a clear reason why this information is important to know. You will find it far easier to identify a coin when you understand its anatomy! Identifying your coins is the first step toward determining the coins' value, as well.

More resources to learn about coins and precious metals from Gainesville Coins:

Check Your Change: You Might Strike Silver

Coin Library: Catalogue of United States Coins

The Ultimate Gold Investing Guide

The 15 Most Valuable Jefferson Nickels: A Visual Guide

Silver Buying Guide

Originally posted here:
Anatomy of a Coin: How to Identify Coins On Sight - Gainesville News

ABC Chief On Future Of Greys Anatomy, The Goldbergs & A Million Little Things – Deadline

ABCs Greys Anatomy continues to rewrite TV history books as it heads off to its 19th season, while The Goldbergs just entered the exclusive double-digit run club for a broadcast comedy.

Primetime-Panic

Your Complete Guide to Pilots and Straight-to-Series orders

We havent made any decisions at all for the upcoming Season 19 of Greys Anatomy and Season 10 of The Goldbergs potentially being the last, ABC Entertainment President Craig Erwich told Deadline in an interview tied to the networks upfront presentation.

ABC Upfront 2022: Deadlines Complete Coverage

We just celebrated Greys 400th episode, which is a remarkable achievement for any show, and I think The Goldbergs continues to be as strong as ever, he said. We have Adams graduation coming up which I think is going to be a signature event in the life of that series.

Erwich also underscored that Greys star and executive producer Ellen Pompeo remains committed to the show.

New Series On Broadcast Networks In 2022-23: Photo Gallery

For the first time in its history, A Million Little Things, created by DJ Nash, will not be on in the fall, with its fifth season held for 2023. This is widely believed to be the dramas final installment through Erwich said that we havent made any decisions yet.

Ive had some really good creative conversations with DJ about what next season would be, I think fans will really enjoy it, Erwich said. The show is ending on a really strong note which I think will take us into a good place for next season.

Follow this link:
ABC Chief On Future Of Greys Anatomy, The Goldbergs & A Million Little Things - Deadline